Refrigerant and oil
Identify the working refrigerant, lubricant and applicable compatibility requirement.
APP-03 · Application
HVAC & Refrigeration
Service, charging, flare and refrigerant-access components for HVACR equipment and tools.
Application qualification
Inputs required beyond the part drawing
These questions establish the actual system boundary and inspection basis.
Connection
Flare, copper tube, core, cap, seal and service-tool interfaces.
Cleanliness
Internal burr, residue, moisture and packaging expectations.
Leak testing
Test medium, method, pressure, acceptance criterion and documentation.
Responsibility boundaries
Refrigerant compatibility and pressure scope must be confirmed for the exact part.
Complete refrigeration valves may carry different certification obligations from loose machined bodies.
Related products
Products for HVAC & Refrigeration
Related product types provide a practical starting point. Final suitability is defined by the drawing and application inputs above.
BFC-VC-01Valve Components
Forged Brass Valve Body
- Port thread
- Body envelope and cavity
- Sealing-seat interface
BFC-VC-02Valve Components
Valve Bonnet
- Body thread
- Stem bore
- Seal geometry and hex
BFC-VC-03Valve Components
Gland Nut / Retainer
- Thread
- Hex or knurl form
- Bore and finish
BFC-VC-04Valve Components
Valve Stem / Seat Retainer
- Diameter and thread
- Groove geometry
- Concentricity and roughness
BFC-HV-01HVACR Components
Refrigeration Service Valve Body
- Service port
- Tube or flare connection
- Cavity and sealing interface
BFC-HV-02HVACR Components
Charging Valve Body
- Core interface
- Body thread
- Tube connection and sealing surface
Discuss a HVAC & Refrigeration project
Send the drawing, mating interfaces, operating conditions and target quantity for a structured review.